SKIPJACK BOATS image


image

Return to Home pages -->              
For Parts Call the Factory 888 947-8337           

Skipjack does sell some items that go into making our boats. Items not listed may be available from your local marine supply. Parts featured here are all original SKIPJACK parts. These are some of the more popular items that have been requested for older and current model boats. Please call for pricing and availability of other items. Smaller items are in stock. Larger items will be made to order. Many venturi windshields are in stock. More items will be added to this list in the future. These items can be ordered direct from the factory. Please do not hesitate to call and order from one of our friendly office staff. Prices subject to change without notice.

We make hatches, swimsteps, bow pulpits and other fiberglass items "to order". We will ask about the color before we process our order. Skipjacks have been made with various shades of white.

To order, please call toll free 888 947-8337 m-f 7-4:30
Talk to our SKIPJACK parts experts.
We accept all credit cards       Most items ship by UPS

Part #

Description

Shipping Price
Name Plates and Vinyl Lettering      
SK-N100 Chrome Name Plate "SKIPJACK"    2-1/4" x 10-3/4", each UPS  
SS-101 Stainless Steel Name plate "SKIPJACK" UPS  
SS-138 Stainless Steel Name plate "SKIPJACK 380", each UPS  
SK-N102 Black Vinyl Letters "SKIPJACK"      7-1/2" x 34", each UPS  
SK-N201 Water Line Striping Tape 2" high, black UPS  
SK-N202 Water Line Striping Tape 2" high, blue UPS  
Venturi's / Windshields
26 & 24 venturi's are in stock 11/18/2016
   
V120 Venturi Windshield for 20 ft. Skipjack Flybridge 8-7/8 x 70 UPS-OS
V124 Venturi Windshield for 24 ft. Skipjack Flybridge 8-7/8 x 70 UPS-OS
V125 Venturi Windshield for 25 ft. Skipjack Flybridge 8-7/8 x 70 Truck
V125 Venturi Windshield for 26 ft. Skipjack Flybridge
1991-1997 (see photos below), same as V125
Truck    
V126 Venturi Windshield for 26 ft. Skipjack Flybridge 
1997 (approx) to present (see photos below) Includes grommets (12)
Truck    
V128 Venturi Windshield for 28 ft. Skipjack Flybridge (3) pcs Truck
V130 Venturi Windshield for 30 ft. Skipjack Flybridge (2) pcs Truck
V138 Venturi Windshield for 38 ft. Skipjack Flybridge (3) pcs Truck
Swimsteps    
SK-S120-C Swimstep, Fiberglass, 20 ft Skipjack 80 x 19, less brackets, with 10" x 6-1/2" cutout in center along transom.
(Top view: flat where it mounts to the transom)
Truck    
SK-S124 Swimstep, Fiberglass, 24 ft Skipjack 82-1/2 x 19, less brackets
(Top view: flat where it mounts to the transom)
Truck    
SK-S124-C Swimstep, Fiberglass, 24 ft Skipjack 82-1/2 x 19, less brackets, with cutout
(Top view: flat where it mounts to the transom)
Truck  
Swimstep for 25 Flybridge
SK-S125 Swimstep, Fiberglass, 25 ft Skipjack 88-1/2 x 19, less brackets
(Top view: has 2-1/4" curve where it mounts to the transom)
Truck    
SK-S126 Swimstep, Fiberglass, 26 ft Skipjack, 96 x 18-1/2 less brackets Truck
SK-S128 Swimstep, Fiberglass, 28 ft Skipjack 88-1/2 x 19, less brackets
(Top view: has 2-1/4" curve where it mounts to the transom)
Truck    
SK-S130 Swimstep, Fiberglass, 30 ft Skipjack, less brackets Truck
SK-S138 Swimstep, Fiberglass, 38 ft Skipjack, less brackets Truck
Swimstep Brackets
SK-B120 Swimstep brackets, set of 4, stainless steel, 20 ft Skipjack UPS
SK-B124 Swimstep brackets, set of 4, stainless steel, 24 ft Skipjack UPS
SK-B125 Swimstep brackets, set of 4, stainless steel, 25 ft Skipjack2 center, 2 end type (end type have slightly different angle) UPS    
SK-B125 Swimstep brackets, set of 3, stainless steel, 25 ft Skipjack w/ twin engines
1 center, 2 end type (end type have slightly different angle)
UPS    
SK-B128 Swimstep brackets, set of 4, stainless steel, 28 ft Skipjack2 center, 2 end type (end type have slightly different angle) UPS    
SK-B128 Swimstep brackets, set of 3, stainless steel, 28 ft Skipjack w/ twin engines
1 center, 2 end type (end type have slightly different angle)
UPS    
SK-B126 Swimstep brackets, set of 4, stainless steel, 26 ft Skipjack UPS
SK-B130 Swimstep brackets, set of 4, stainless steel, 30 ft Skipjack UPS
SK-B138 Swimstep brackets, set of 5, stainless steel, 38 ft Skipjack UPS
86 inch swimstep
Bow Pulpits  
SK-P12X Bow Pulpit 20,24 & 25 ft. Skipjack 15 x 54 (bottom is contoured to fit deck)
SK-P126 Bow Pulpit 26 ft. Skipjack
SK-P130 Bow Pulpit 30 ft. Skipjack
SK-P135 Bow Pulpit 35 ft. Skipjack
SK-P138 Bow Pulpit 38 ft. Skipjack
Locks and Drawer Parts  
SK-L126
 
Sliding Door Push Button Lock with (2)  keys (can be copied) for 26 ft Skipjacks. This lock is an improved version of the original, heavy duty. UPS  
SK-L130 Sliding Door Lockset, 30 ft (Cabin Door) with 2 keys
Call for current pricing on this lock set.
UPS  
Blank key for sliding door lock set. Can be copied if you have an original.
Call for availability on this key.
 
SK-L140 Head Door, Handle and latch assy. UPS
SK-D101 Drawer, Push Button Latch, old style (3) pc set UPS
SK-D102 Drawer, Push Button Latch, new style (3) pc set UPS
Radar Arches  
SK-R120 Radar Arch for 20 ft. Skipjack

Truck

SK-R124 Radar Arch for 24 ft. Skipjack

Truck

SK-R126 Radar Arch for 26 ft. Skipjack

Truck

SK-R126-F Radar Arch for 26 ft. Skipjack, flip back style

Truck

SK-R130 Radar Arch for 30 ft. Skipjack Truck
SK-R138 Radar Arch for 38 ft. Skipjack Truck
Seats  
B126 Bucket Seat, 26 ft. Flybridge, fiberglass and upholstered UPS
B026 Fiberglass Portion of  Bucket only UPS
B101 Pedestal and Slider
BS226 32" Bench Seat, 26 ft Flybridge, upholstered Truck
BS326 Full Width Bench Seat, 26 ft. Flybridge Truck
S124 Standard 24 Open Seat
S224 Fold Out Set for 24 Open Truck
S230 30 ft Fold out seat for bridge, includes new style fiberglass base Truck
Click Here For Pictures Of Seats ---> CLICK
Bimini and Canvas    
SK-C126 Bimini, 26 ft with SS bows
SK-C226 Enclosure (Windshield and side curtains), 26 ft.
SK-C326 Back drop, 26 ft.
Coaming Pads, 262, 300 set of 3 pieces
Coaming Pads for 380
 Side Hatches    
 Note 24 open hatches do not have the original aluminum outer ring, this ring is not available. Use hatch supports shown below    
 SK-H124-1 Cockpit hatch, 24 open, 17-3/4 x 29-3/4 with hinge indents on one side UPS
 SK-H124-2
 
Cockpit hatch, 24 open, 17-3/4 x 29-3/4 no hinge indents, lift out style UPS
 SK-H124-3 Cockpit hatch, 24 open, 17-3/4 x 29-3/4 with hinge indents on one end UPS
 SK-124K Hatch corner support kit, 1/4" aluminum & lift bolts (for 3 hatches) UPS
 SK-H126-1 Cockpit side hatch, 26 Flybridge, each (2 required) UPS
952 3 x 3 engine hatch hinges, chrome plated brass, 6 holes per hinge
Engine Hatches / Covers
20 open 34-1/2 wide x 35-1/2 long x 16 high...
37-1/2 wide x 42-1/2 long x 11 high
Twin
engine cover
 51 wide x 42-1/2 long x 11-1/2 high...
39 wide x45-1/2 long x 7-1/2 high...
Misc  
  25' Fisherman model Pilot house "Basic frame for windows" only (no top). Smooth fiberglass in and out. Size: 61-1/2 long at top along side, 20-3/4 high, 62-1/2 wide, 58 long at bottom. Window areas cut out. Supplied in standard white-white gel coat. Call for pricing on special color. Truck    
28 Parts, Seat Base, Dash Panels, etc.
 8 gauge Panel for 28' Skipjack Flybridge UPS
Helm Dash Panel for 28" Skipjack Flybridge UPS
Seat Base
Pilot Houses
28' Pilot house frame only (less roof and slider) Truck
28' Roof for pilot house Truck
28' Roof inner attachment frame
28' Slider hatch for pilot house
28' Slider hatch inner panel

Click here--->Photo of 28' frame, roof and slider hatch
We do NOT have hardware or windows available for the 28 pilot house.
263 Pilot House with roof and frame
Was original on the Skipjack "26 Fisherman"
Side length 72-1/2"
Length down the center 89-1/2"
Width (front) 72-1/2"
Width (rear) 75"
Height 30-1/2"
Window area is "blanked-off" and all windows must be cut in.
We do NOT have hardware or windows available for this 263 pilot house.
Truck
Misc.
26' Battery box, fiberglass, holds 2 plastic battery boxes 7-1/2 x 13-5/8  (Plastic battery boxes with lids, not included)
Outer size of fiberglass 11" x 37" (fits angle of hull bottom) Will fit either side of boat. Using 2 of these, you can install 4 batteries.
or late model 26 ft. (years 2013-2017)
 
Flush mount fuel or water vents. These are the good S/S ones, that mount in the proper direction to stop salt build up when installed with elbow "up". For 5/8 hose.  
  30 ft "Tackle Center Box". Complete with door (2 latch style) and plastic tackle boxes. Made completely of fiberglass. box holders are securely fastened to box with SS screws. The starboard side box has cut out in top for mounting hatch lift switch. Cut out dimension is 10-1/2 x 20-1/2. Overall size is 13 x 23-1/4 and 17" deep.
See photo below.
     
Steps Starboard plastic style, marine plastic bridge steps for 26 ft  (3) and 30 ft (4)
Cleats 8" cleats
Rod Holders 30 degree rod holder
Control Cables  
Control Cables <-----Click here
Hard Tops  
24 Open Hard Top. 2" Thick, 88" long x 71" wide
Center length dimension (88") includes the rounded front. Side dimension (front to back) is 79"
24  Open Radio Console, fits under the hard top
380 Flybridge Hard Top. 3" Thick, 12 ft long x 10 ft wide
Rub Rails and Matching Inserts
  Rubber rub rail insert for 262 26ft. and other earlier models, 20, 24 ,25. Specify White or Black
This is made exactly like the original rubber insert and same rubber formula. Be careful of any aftermarket look a likes.
UPS  
Aluminum rub rail, bright anodized and drilled every 8". Available in 12 ft lengths or 1 ft increments.

See larger photo below.
 
These also fit late model 30 ft and late model 380 ft.
This is the "original" Skipjack aluminum rubrail currently mfg from the original die and from the original extruder.
UPS
Aluminum Trim for 24' Flybridge
3/8 wide x 6 ft long... Not Drilled
UPS

 
       
Prices subject to change without notice.
Boat Scoops...click here ---> SCOOPS     
and more.
Engine, Steering  and Controls Cables (Morse) For older Skipjacks --->CLICK HERE
20 Open, 24 Open, 24 Flybridge, 25 Sport Cruiser, 25 & 26 Fish, 25 & 26 Flybridge, 28 Flybridge

Popular Parts for older Skipjacks

 

  
SKIPJACK Chrome Logos

Chrome LOGOS Plates are chrome plated bronze.

They do not have the numbers "24", "26", "28"etc.
 

 


 
Vinyl Logo, Black. With "backings" ready to install. 7-1/2" tall X 34" long (With instructions)
 

 
Cockpit hatch, 24 open, 17-3/4 x 29-3/4 available with hinge indents on one side, end or none.

Bottom view of cockpit hatch, 24 open

 

Drawer Button and "Ring" (old style shown)

 

 

NEW! 26 ft Sliding door lock with (2) keys. These keys can be copied at your local locksmith. This lock is slightly larger in diameter that the original but is made of heavy duty plated brass. 

 

 


Hatch corner support kit, 1/4" thick aluminum. 10 pcs + 3 lifting bolts
For cockpit hatches / 24 ft. "open".
 

 


 
 24 ft. Swimstep (24 Open shown) # SK-S124
 

24 ft. Swimstep
(24 Open shown)
# SK-S124

82-1/2" x 19"
(Top view: Flat across where it mounts to the transom)
(2nd bracket mounts 29" from edge of swimstep)

 
 
  Bucket Seats 26 ft.   # SK-B126
 

Bucket Seats for
26 ft.  
# SK-B126


 
  Bimini, 26 ft.  # SK-C126
 

Bimini, 26 ft. 
# SK-C126


 
  Bimini with Enclosure 26 ft.  # SK-C226
 

Enclosure 26 ft. 
# SK-C226

  

Venturi
(bridge windshield)
26 ft Skipjack

V126

New Style Venturi. Mounts to inside edge.
For internal mount 26's only.
This Venturi will not fit old style 26's.
For hull #'s SKP262...

Note, edge of flybridge has "rounded" look.

  

Venturi
(bridge windshield)
26 ft Skipjack

V125

The V125 is the old Style Venturi. For old style only. Mounts to "outside". This Venturi will not fit new style 26's.

(Pre 1997, approx.)
1991-1997 (approx)
for hull #'s SKP260... & SKP261....

Note, edge of flybridge has "squared" look. If your boat has "squared" sharp edges on the flybridge, the new style will not fit.

 

"8" Gauge Panel for 28' Skipjack-Flybridge

Helm "Dash" Panel for 28' Skipjack Flybridge


Seat Base 28 ft.


Seat Base 28 ft

                   
   

   
       
                   
Venturi Windshield for
20 ft. Skipjack Flybridge
8-7/8 x 70
20' and 24' are the same
                   
   

   
       
                   
Venturi Windshield for
24 ft. Skipjack Flybridge
8-7/8 x 70
20' and 24' are the same
08/28/2012 We have one 24 Venturi, that has small scratches that we will sell at $210
Fuel Vent  for 30 ft. and 26 ft
New Style
"Flush Mount"


 



Tackle Center for 30 ft. Skipjack
Features all fiberglass construction, includes 3 small boxes and
3 large boxes.
 




2 latch door and mounts to original location in the 30 ft. Skipjack
Cut out dimension is 10-1/2 x 20-1/2.
Overall size is 13 x 23-1/4 and 17" deep.
 


86" long 18" wide 1-3/4 thick
Top view curve is 2-3/4 from straight
$36.95

 Part Number..SK-200
 Skipjack Rod Holder
 
30 degree rod holder.

Our search for a high quality rod holder, led us to having this rod holder custom made. 1-5/8 I.D., 8" deep. This is a high quality rod holder. Made of SOLID 316 Stainless Steel. Not made from a stamping. Has cross bar in bottom.  Includes black rubber insert that has a "Rounded" formed upper lip. Bottom has pipe thread hole for installing a drain hose. This drain is important when rod holder does not drain directly to cockpit. For installation into decks and side panels as installed in 26 ft and 30 ft Skipjacks.

 

 

 

$19.95

 Part Number..SK-202
 Skipjack SS Cleat

Cleat for 26 and 30  ft Skipjacks. 316 Stainless Steel

5/16 studs (1-7/8 long), 8" long 1-5/8 high

Also available without studs SK-203

 


Rubber rub rail insert for 262 26ft. 20, 24, 25. Specify White or Black

Aluminum rub rail, bright anodized and drilled every 8"




1-3/8" wide
7/8" high on longest leg

Prices, specifications and options subject to change without notice.

888-947-8337

Copyright 2011 Skipjack (c) by Invader Marine LLC, all rights reserved
 
image
image
image